Compatible Part:Fox 802-03-012 | Fox 802-00-008-KIT | Fox 802-00-013-KIT
Options:
1/8" - 27 NPT | Standard Pressure:
Nickel plated brass nitrogen reservoir schrader valve. These are for use in small air shocks such as Harley Davidson air shocks, and also for lower pressure air shocks, air forks, etc. For higher pressure nitrogen use (like Fox Podium / Performance series) we highly recommend the ones below with the high pressure / temperature cores and metal cap. The schrader valve base thread is 1/8" NPT (tapered National Pipe Thread) and is about 7/8" in total length. It is nickel-plated, and has 180 PSI sustained, 250 PSI peak pressure valve cores installed and comes with a acorn plastic cap installed. These are quality Schrader brand.
1/8" - 27 NPT-HP/T | High Pressure/Temperature:
Nickel plated brass nitrogen reservoir Schrader valve. The schrader valve base thread is 1/8" NPT (tapered National pipe thread) and is about 7/8" in total length. These schraders have a valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and come with a nickel plated brass high pressure metal cap installed. These are quality Schrader brand.
Ideal for upgrading Fox Podium / Performance UTV shocks with rubber pellet / needle fill port reservoir endcaps and shocks to a standard schrader valve so you can use a standard no-loss chuck (you will need to drill and tap the endcaps to accept these schraders on those applications).
1/8" - 27 NPT-SS-UHP/T | Ultra High Pressure/Temperature:
Non-magnetic, marine grade, 316 stainless steel bodied, nitrogen reservoir schrader valve. The schrader valve base thread is 1/8" NPT (tapered National pipe thread) and is about 7/8" in total length. Schrader valve has a Viton valve core installed (with -40 to 450 degree temperature rating and 80-3000 PSI sustained peak pressure rating) and comes with a nickel plated metal cap installed. These are quality Schrader brand.
Ideal for upgrading Fox Podium / Performance UTV shocks with rubber pellet / needle fill port reservoir endcaps and shocks to a standard schrader valve so you can use a standard no-loss chuck (you will need to drill and tap the endcaps to accept these schraders on those applications).
1/4" - 18 NPT-HP/T | High Pressure/Temperature:
Nickel plated brass nitrogen reservoir Schrader valve. The schrader valve base thread is 1/4" NPT (tapered National pipe thread) and is about 1&1/2" in total length. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and comes installed with a nickel plated brass high pressure metal cap. These are quality Schrader brand.
5/16" - 32 ORB-HP/T | High Pressure/Temperature:
7075 billet aluminum nitrogen reservoir Schrader valve. Used on Fox float shocks as well as others. This schrader valve base thread is 5/16" - 32 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and comes installed with a nickel plated brass high pressure metal cap. These are quality Schrader brand. (Fox 802-03-012)
These are available in three (3) options:
Machine Finish (with nylon o-ring cap)
Machine Finish (with metal cap)
Red or Black Anodized (with metal cap)
5/16" - 24 ORB-HP/T | High Pressure/Temperature:
Nickel plated brass nitrogen reservoir schrader valve. Used on Works Performance remote and piggyback reservoir endcaps that have schraders with o-rings on them.
The earlier year caps used standard pipe thread schraders. For those caps you would want to use 1/8" - 27 NPT-HP/T schrader valves. This schrader valve base thread is 5/16" - 24 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and comes installed with a nickel plated brass high pressure metal cap. These are quality Schrader brand.
7/16" - 20 ORB-HP/T | High Pressure/Temperature:
Brass nitrogen reservoir schrader valve. This schrader valve base thread is 7/16" - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1.25" total length. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and comes installed with a nickel plated brass high pressure metal cap. These are quality Schrader brand. Fox 802-00-013-KIT
7/16" - 20 ORB-HP/T | Ultra High Pressure/Temperature:
Stainless Steel nitrogen reservoir schrader valve. The schrader valve base-thread is 7/16" - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1.25" total length. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating) and comes installed with a nickel plated brass high pressure metal cap. These are quality Schrader brand. Fox 802-00-008-KIT
King Shocks 1/8" NPT ORB| High Pressure/Temperature | Straight Thread; O-Ring Backed:
High-Temp/Pressure schrader valve with 1/8" NPT straight thread ORB(o-ring-backed) base section. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating)
and have knurled high pressure nickel plated metal cap installed.
8mm x 1.0 Thread ORB High Pressure /Temperature: High-Temp/Pressure schrader valve with 8mm x 1.0 ORB(o-ring-backed) base section. These schraders have valve core installed (with -40 to 450 degree temperature rating and 0-500 PSI sustained peak pressure rating)
and have a high pressure nickel plated metal cap installed.
