Home > Off Road > Shock Rebuild Seal Kits >

Ford Raptor Fox IBP Shock Rebuild Seal Kits | Revision A & B [F/R]
Ford Raptor Fox 2.5 Internal Bypass Shock Rebuild Seal Kits - Revision A & B | Schmidty Racing


 
Alternative Views:


Base Price: $15.00


Product Code: O-SK-FOX-FORD-RAP

Kit Type
Click to view another Fitting

Select a Kit Type*:


Qty:  
Description
 
Fit Location: Front | Rear
Type: Single (for 1 shock)

This is a shock rebuild seal kit from Schmidty Racing Suspensions for rebuilding the Fox internal bypass shocks on SVT Ford Raptor pickup trucks. These are premium rebuild kits and include all the seal needed to rebuild one (1) Revision A or B shock per kit. Each seal kit comes equipped to rebuild either revisions shocks, not al included seal may be needed / used. Front and rear and seal kits are different, so be sure to order the kit you need.

We have combined all the different kit options into one listing to make it easier for you to choose the exact kit you want. Kits are available with either "Buna" or "Viton" material o-rings. Buna is the factory-original material but is softer and will wear out faster than Viton. Viton is less prone to damage wear or heat and will typically increase time between servicing, however, it is not recommended for Arctic climates as it is a more dense material and underperforms in colder temperatures.


Buna or Viton Kits Available:

  1. Seal Kit Only
  2. Seal Kit w/ Piston & IFP Wearbands & OEM style self-healing Rubber Pellet
  3. Seal Kit w/ Piston & IFP Wearbands & Schrader Valve
    (to convert the OEM pellet into a traditional off-road style nitrogen charging port)

  4. Note: You will need to drill and tap the shock caps to install the schrader valves.

We also use, recommend, and sell Lucas synthetic shock oil. Lucas synthetic fork / shock oil provably lowers fork or shock temperatures up to 25-30 degrees under harsh conditions and reduces wear / friction (compared to other leading shock oils). Using this oil results in better performance over longer periods of time and in longer intervals between servicing. We recommend 7.5wt for the Ford Raptor shocks.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Raptor seal kits November 2, 2020
Reviewer: Aaron Link from Novato, CA United States  
The kit shipped fast and the tap and dye kit was perfect.  I wish there were some instructions, it is a little confusing what seals go where and the orientation, mainly because the one seal seems to replace some spacers and a single black seal as opposed to the tan (viton?) seal.  Please let me know if you have any available instructions or guides, thank you.     Oh yeah, is it possible to order individual seals, I keep tearing them getting them over the shaft.  Usually for other machines there is a seal guide made of thin plastic, so you all have something like this?

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 October 18, 2020
Reviewer: Ian Westbrook  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice to have a deal with you, thanks December 3, 2019
Reviewer: Artur Vdovenko from Wilmington, DE United States  
Nice to have a deal with you, thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Muy bien July 23, 2019
Reviewer: Fernando Blanco from Nogales, AZ United States  
Excelente

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great kit March 22, 2018
Reviewer: Jeffrey Caldwell from Clarksville, TN United States  
Had everything I needed, quality seals, Evan went above and beyond with this order and took great care of me.  Communication throughout the process, before and after sale.  Simply awesome.

Was this review helpful to you?

View All Customer Reviews