1/8 - 27 NPT:Standard pressure nitrogen reservoir Schrader valve. for use in small air shocks such as Harley Davidson, air forks and Works Performance shocks etc. (**For Fox Podium shock use, we recommend the ones below with the high temp/pressure cores and metal cap**) The schrader valve base thread is 1/8" NPT (tapered National Pipe Thread) and is about 7/8" in total length. It is nickel-plated, and has 180PSI sustained, 250PSI peak pressure valve cores installed and comes with a acorn plastic cap. These are ("Schrader") brand, and not cheap Chinese imports.
1/8 - 27 NPT-HP/T: HIGH PRESSURE/TEMP nitrogen reservoir Schrader valve. The schrader valve base thread is 1/8" NPT (tapered National pipe thread) and is about 7/8" in total length. It is nickel-plated, and has a -40-450* AND 500 PSI sustained peak pressure valve core installed and comes with a NICKEL plated metal cap. These are quality ("Schrader") brand, and not cheap Chinese imports.
****Ideal for upgrading FOX PODIUM & PERFORMANCE SERIES UTV shocks with rubber pellet/needle fill port reservoir end-caps and shocks to a standard schrader valve so you can use a standard No-loss chuck. (You will need to drill and tap the endcaps to accept these schraders on those applications)****
1/4 - 18 NPT-HP/T:HIGH PRESSURE/TEMP nitrogen reservoir Schrader valve. The schrader valve base thread is 1/4" NPT (tapered National pipe thread) and is 1&1/2" in total length. It is nickel-plated, and has a -40-450* AND 500 PSI sustained peak pressure Viton valve core installed and comes
with a NICKEL plated metal cap. These are Schrader brand, and not cheap Chinese imports.
5/16 - 32 ORB-HP/T:HIGH PRESSURE/TEMP nitrogen reservoir Schrader valve. Used on Fox Float shocks, as well as others as well. This schrader valve base thread is 5/16 - 32 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. It has an aluminum body, and has a -40-450* temp. & 500 PSI sustained peak pressure, Viton valve core installed. Comes w/ a NICKEL plated metal cap. Fox part #:
802-03-012 5/16 - 24 ORB-HP/T:HIGH PRESSURE/TEMP nitrogen reservoir Schrader valve. Used on Works Performance Remote and Piggyback reservoir end-caps that have schraders with o-rings on them. The earlier year caps used standard pipe thread schraders. For those caps you would want to use
1/8 - 27 NPT-HP/T: HIGH PRESSURE/TEMP schrader valves. This schrader valve base thread is 5/16 - 24 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. It has a NICKEL plated brass body, and has a -40-450* temp. & 500 PSI sustained peak pressure, Viton valve core installed. Comes w/ a NICKEL plated metal cap.
7/16 - 20 ORB-HP/T:HIGH PRESSURE/TEMP (BRASS BODY) nitrogen reservoir Schrader valve. This schrader valve base thread is 7/16 - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1" total length, it has a brass body, and has a -40-450* temp. , & 500 PSI sustained peak pressure; Viton valve core installed. Comes with a NICKEL plated metal cap. Fox part #: 802-00-013-KIT
7/16 - 20 ORB-HP/T:HIGH PRESSURE/TEMP (STAINLESS STEEL BODY) nitrogen reservoir Schrader valve. This schrader valve base thread is 7/16 - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1" total length, it has a stainless steel body, and has a -40-450* temp. , & 4000 PSI sustained peak pressure; NITRILE valve core installed. Comes with a high pressure NICKEL plated metal cap. Fox part #: 802-00-008-KIT