Home > NITROGEN / SHOCK TOOLS > Accessories >

Nitrogen Reservoir Schrader Valves
Nitrogen Reservoir Schrader Valves | Schmidty Racing


 
Alternative Views:


Base Price: $6.50


Availability: Usually Ships in 24 Hours
Product Code: N-SHR

Click to view another Fitting

Schrader*:


Qty:  
Description
 

1/8 - 27 NPT: Standard/ Low pressure: Nickel Plated Brass nitrogen reservoir Schrader valve. These are for use in small air shocks such as Harley Davidson air shocks , and also for lower pressure air shocks,& air forks,etc. (**For higher pressure nitrogen use , like Fox Podium, & Performance series shock use etc, we highly recommend the ones below with the high temp/pressure cores and metal cap**) The schrader valve base thread is 1/8" NPT (tapered National Pipe Thread) and is about 7/8" in total length. It is nickel-plated, and has 180PSI sustained, 250PSI peak pressure valve cores installed and comes with a acorn plastic cap installed. These are ("Schrader") brand, and not cheap Chinese imports.

1/8 - 27 NPT-HP/T: HIGH PRESSURE/TEMP: Nickel Plated Brass nitrogen reservoir Schrader valve. The schrader valve base thread is 1/8" NPT (tapered National pipe thread) and is about 7/8" in total length. These schraders have a (-40-450* temperature rating, & 0-500 PSI sustained peak pressure rating) valve core installed and comes with a NICKEL-plated brass high pressure metal cap installed. These are quality ("Schrader") brand, and not cheap Chinese imports. ****Ideal for upgrading FOX PODIUM & PERFORMANCE SERIES UTV shocks with rubber pellet/needle fill port reservoir end-caps and shocks to a standard schrader valve so you can use a standard No-loss chuck. (You will need to drill and tap the endcaps to accept these schraders on those applications)****

1/8 - 27 NPT-SS-UHP/T: ULTRA HIGH PRESSURE/TEMP: Non-Magnetic, Marine grade, 316 Stainless-steel schrader valve body, nitrogen reservoir Schrader valve. The schrader valve base thread is 1/8" NPT (tapered National pipe thread) and is about 7/8" in total length. Schrader valve has a (-40-450* temperature rating), and a (80-3000 PSI sustained peak pressure rating), Viton valve core installed, and comes with a NICKEL plated metal cap installed. These are quality , manufactured in the ("USA ") schraders, and are not cheap Chinese imports. ****Ideal for upgrading FOX PODIUM & PERFORMANCE SERIES UTV shocks with rubber pellet/needle fill port reservoir end-caps and shocks to a standard schrader valve so you can use a standard No-loss chuck. (You will need to drill and tap the endcaps to accept these schraders on those applications)****

1/4 - 18 NPT-HP/T: HIGH PRESSURE/TEMP: Nickel Plated Brass nitrogen reservoir Schrader valve. The schrader valve base thread is 1/4" NPT (tapered National pipe thread) and is about 1&1/2" in total length. These schraders have (-40-450* temperature rating, & 0-500 PSI sustained peak pressure rating) valve core installed and comes with a NICKEL-plated brass high pressure metal cap installed. These are quality ("Schrader") brand, and not cheap Chinese imports.

5/16 - 32 ORB-HP/T: HIGH PRESSURE/TEMP: 7075 billet aluminum nitrogen reservoir Schrader valve. Used on Fox Float shocks, as well as others as well. This schrader valve base thread is 5/16 - 32 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. The schrader valves have a (-40-450* temperature rating, & 0-500 PSI sustained peak pressure rating) valve core installed and comes with a NICKEL-plated brass high pressure metal cap installed.
same as Fox part #: 802-03-012
-these schrader valves are available in the following 3 options:
* machine finish with metal cap
*red anodized/ black anodized with metal cap
* machine finish with Nylon Fox o-ring cap.


5/16 - 24 ORB-HP/T: HIGH PRESSURE/TEMP:Nickel Plated Brass nitrogen reservoir Schrader valve. Used on Works Performance Remote and Piggyback reservoir end-caps that have schraders with o-rings on them. The earlier year caps used standard pipe thread schraders. For those caps you would want to use 1/8 - 27 NPT-HP/T: HIGH PRESSURE/TEMP schrader valves. This schrader valve base thread is 5/16 - 24 ORB (5/16" ORB straight thread with o-ring) and is about 1" total length. It has a NICKEL plated brass body, and has a -40-450* temp. & 500 PSI sustained peak pressure, Viton valve core installed. Comes w/ a NICKEL plated metal cap installed.

7/16 - 20 ORB-HP/T: HIGH PRESSURE/TEMP (BRASS BODY): Stainless-steel nitrogen reservoir Schrader valve. This schrader valve base thread is 7/16 - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1-1/4" total length, it has a brass body, and has a -40-450* temp. , & 500 PSI sustained peak pressure; Viton valve core installed. Comes with a NICKEL plated metal cap.
Fox part #: 802-00-013-KIT

7/16 - 20 ORB-HP/T: ULTRA HIGH PRESSURE/TEMP (STAINLESS STEEL BODY) Stainless-steel nitrogen reservoir Schrader valve. The schrader valve base-thread is 7/16 - 20 ORB (7/16" ORB straight thread with o-ring) and is about 1-1/4" total length. Schrader valves has a (-40-450* temperature rated, & 80-3000 PSI sustained peak pressure) "BLACK" Viton High Pressure valve core installed. come with knurled high pressure NICKEL plated metal cap installed.
Fox part #: 802-00-008-KIT

KING SHOCK 1/8" NPT (STRAIGHT THREAD/O-RING BACKED)
High-Temp/Pressure schrader valve with 1/8" NPT straight-thread ,o-ring-backed, base thread section/ Schrader valves come with knurled high pressure NICKEL plated metal cap installed.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 35 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 May 25, 2020
Reviewer: Anonymous Person  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect! May 12, 2020
Reviewer: Ian from Dracut, MA United States  
Exactly what I needed, ordering another shortly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 26, 2020
Reviewer: Karen Hutchison from SURPRISE, AZ United States  
Exactly as described. They did need tapped. Would have been nice to fit the Allen plug thread that was removed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nitrogen Schrader Valves April 8, 2020
Reviewer: Bret Williamson from Colorado Springs, CO United States  
I needed these for the shocks on my KTM dirt bikes.  KTM (WP) uses an expensive tool to charge their shock reservoirs with nitrogen.  It is less expensive to change their reservoirs over to use a standard Schrader valve instead of using the KTM tool.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nitrogen Schrader Valves April 1, 2020
Reviewer: David Britton from Oregon City, OR United States  
Great parts and was easy to install.

Was this review helpful to you?

View All Customer Reviews