This is a shock rebuild seal kit from Schmidty Racing Suspensions for rebuilding Fox Podium 2.0" coilover shocks on the 2011-2014 Polaris RZR 900 2 seat model. This kit fits RZR XP900-2 seat with Fox 2.0" shocks x 5/8" shafts (PR). Does not fit RZR XP900-4 seat which use Walker Evans shocks; will not fit Walker Evans; and will NOT fit later years of 900S.
Our seal kits contain high pressure / temperature resistant oil seals and Viton piston & IFP o-rings, giving better performance and increasing time between servicing.
When doing your rebuild, we strongly recommend the use of a seal bullet while putting the sealhead back on the shaft, which are available in the tool section. We also suggest installing our high volume nitrogen replacement reservoir endcaps, to eliminate the leak prone rubber pellet system used on the OEM ones; when recharging the shocks. Our replacement caps have a schrader valve already installed in them, and the schrader is recessed into the cap protecting it from trail damage and come topped with an o-ring sealed cap.They also increase the capacity of the reservoir, so it stays charged at or near your desired pressure for a longer period, giving you a longer service interval.
