• Free Ground Shipping for all orders over $500 in the US, Including Spring Kits

Navigate to the www.schmidtyracing.com homepage

Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 1 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 2 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 3 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 1 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 2 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 3 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 1 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 2 of 0
Textron Wildcat XX QS3 Fox 2.5" Rebuild Bundle | Schmidty Racing Suspensions - Image 3 of 0

Textron Wildcat XX Fox 2.5" QS3 Shock Rebuild Bundle

0 Reviews
$0.00
Choose your options:
Bundle Options:
Product Code: UT-SK-PL-TEXTRONXX-BUNDL
Models / Sizes: Textron Wildcat XX Models with 2.5" Fox Shocks Front & Rear

This shock rebuild bundle from Schmidty Racing Suspensions includes all the parts needed to rebuild all (4) shocks for Textron Wildcat XX with Fox QS3 Shocks.

These models do not have Billet Internal Floating Pistons with bleed screws from the factory. We highly recommend replacing them to allow completely removing the air from the shock at rebuild.

Textron Wildcat XX Shock Rebuild Bundle:


  • (2) Fox 2.5" x 7/8" Shaft Seal Kit Pair
  • (1.5) Gallons of Lucas Synthetic Shock Oil in 7.5wt
  • (4) 2.5" Dark/ Hard Piston Wear Bands
  • (4) 2.5" Gen 2 High Volume Nitrogen End Caps
  • (1) Shaft Seal Bullet (Fox Shock 7/8" x .498" shank)

    Optional:
  • (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link) & one (1) Walker Evans IFP Pull-Out Tool
  • (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link)

    Reviews

    Average Rating:
    ( 0 )