Home > UTV > Dual Rate Spring Hardware >

FOX PODIUM & PERFORMANCE SERIES Billet Pre-load Collars W/ Pinch Bolt
Billet Pre-Load Collar Schmidty Racing, for FOX Aluminum bodied shocks


 
Base Price: $64.00


Quantity in Stock:44
Availability:: Usually Ships in 24 Hours
Product Code: UT-DRH-BPLC-F2.0-3.0

Click to view another Fitting

Choose shock collar size::


Qty:  
Description
 
Tired of having to use two spanner wrenches which always slip off, and bloody your knuckles, and beat up everything around the shock when the spanners slip off??? Here at Schmidty Racing, we HAVE the cure!! These replacement pre-load collars are thick,beefy, and are made from 6061 billet aluminum. They are ready for race abuse, and make pre-load adjustments sooo much easier.. These replace the 2 OEM toothed upper pre-load collars on each shock. We designed these collars to use a positive connection pin-style spanner wrench to make adjustments, (which we carry in the "tool" section) so our collars will not get all chewed up over time. On many machines, where the area needed to a spanner wrench in to make and adjustments is very tight; a typical hook style spanner is basically impossible to use, and consistently will slip off. Our pin style spanner wrenches will NOT, and therefore just work so much better. .. Simply loosen the stainless pinch bolt and use our pin spanner wrench to adjust pre-load setting,& re-tighten the pinch-bolt. These will fit the OEM, aluminum bodied, FOX Podium & Performance series shocks found on Polaris, Yamaha, CanAm, Kawasaki, and possibly other brands as well. These will NOT fit Walker Evans shocks.. These collars are completely user friendly, and do not need any shock modifications to use, simply remove your OEM pre-load collars, and thread these on. Each kit contains (2) preload collars,& will do (2) shocks. If you need enough for 4 shocks, you will need 2 kits. You will not find these collars anywhere else.

We carry the collars in these 3 sizes:
Fox-2.0" (will only fit 2.5" I.D. springs)
Fox-2.5"
(will only fit 3.0" I.D. springs)
Fox-3.0"
(will only fit 3.75" I.D. springs)

Some of the known models that fit each size.
-2.0": Robby Gordon 800-4, RZR 800-4, RZR XP900 (2SEAT), RZR 900/1000S, CanAm Commander & Mavericks (with 2.0" shocks), I am sure there are other models as well.

-2.5": Front 2.5" IBP shocks on XP1000Turbo (2&4 seat) and Fox Edition 1000, CanAm Mavericks with 2.5" shocks,
Front 2.5" IBP shocks on CanAm Maverick X-3,Yamaha YXZ's, I am sure there are other models as well.

-3.0": Rear 3.0" IBP shocks on XP1000Turbo (2&4 seat), & Fox Edition 1000, Rear 3.0" IBP shocks on CanAm Maverick X-3, I am sure there are other models as well.






Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Spring kit December 3, 2018
Reviewer: Jim schuman from Seabeck, WA United States  
Awesome customer service and very informative in helping you get what you need

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Beat the pants of Fox's stock lock rings! April 17, 2018
Reviewer: Scott McConnell from Lake Panasoffkee, FL United States  
Yeah, so removing the shocks and springs to install these collars is a pain, but it's the last time I will ever have to deal with a busted knuckle using the silly factory lock ring tools that never stay put when trying to lock them in place or loosen them.  These collars make it almost too simple to change your preload!

Was this review helpful to you?