Home > UTV > Dual Rate Spring Hardware >

FOX PODIUM 2.0" Dual Rate Spring Hardware Kit (Race Version)
FOX PODIUM 2.0" Dual Rate Spring Hardware Kit (Race Version)


 
Alternative Views:


Base Price: $190.00

Availability:: Usually Ships in 24 Hours
Product Code: UT-DRH-FX-2.0RH
Qty:

Description
 
Race version dual-rate spring hardware kit ,from Schmidty Racing Suspension; to convert the OEM, aluminum bodied, Fox 2.0" shocks found on these models to a true dual-rate shock with our adjustable crossover collars, which allow you to adjust where in the shock stroke the crossover from the initial spring rate (both springs active), to the bottom main spring happens. Our kit fits these models.
-2-seat Polaris XP-900
- RZR-S 900, & RZR-S 900-4, RZR-S 1000
- Robby Gordon RZR4-800
- CanAm Commander 1000
-Can Am Mavericks with 2.0" Fox shocks.
Our RACE hardware is made of 6061 billet aluminum and is ready for heavy duty , or race use. The top preload collar is a 1-piece collar with a stainless-steel pinch bolt and uses a stud style spanner wrench for effortless pre-load adjustments which replaces the 2 OEM toothed collars. The beefy 3/4" thick lower spring retainer clip replaces the OEM cast aluminum spring clip that commonly breaks. Our hardware also allows you to retain the OEM plastic shaft guards on the rear shocks, on the XP900. This kit includes (2) upper pre-load collars with pinch bolt, (4) threaded cross-over collars (2 per shock), (2) nylon spring separators, and (2) lower retaining clips with shaft guard hardware with (6) stainless steel screws & nylon spacers to run the XP900 shaft guards. This kit will do 2 shocks. If you need enough for 4 shocks, you will need (2) kits. The kit is completely user friendly, and does not need any shock modifications to use,and will fit either front or rear shocks.. These will fit all years of the 2 seat XP-900, as well as the Robby Gordon 800 RZR-4 that uses the same 2.0 aluminum bodied Fox Podium shocks. This kit is specific to the RZR-XP-900 2 seat, Robby Gordon 800 RZR-4, shocks, The new RZR-S 900,RZR-4 900, and RZR-S1000. These will NOT fit Walker Evans shocks. They also will NOT fit the smaller 1.5" 800 RZR-S Fox shocks.
Many companies have spring kits with 2 springs per shock, but have no mechanical stop. These kits will never become dual rate, until one of the springs coil bind.(if that ever even happens!!). Often in these cases, what you are effectively really getting, is an expensive single rate spring. Because as long as both springs are active, there is only one spring rate, which is the combination of both of them! . Our kits may cost a bit more, but you get what you pay for.. Our hardware is second to none!! Billet Pin-Spanner wrenches for our RACE hardware, are available in the accessory section.

Share your knowledge of this product. Be the first to write a review »