Home > UTV > Spring Kits >

Polaris RZR XPT 1000 TURBO Dual-Rate Spring Kit
RZR XPT 1000 Dual Rate Spring Kit Schmidty Racing


 
Alternative Views:


Base Price: $1,100.00


Availability:: Usually Ships in 24 Hours
Product Code: UT-SPK-DR-XPT1000-EDR

Click to view another Fitting

Kit Selection:


Qty:  
Description
 

Introducing Schmidty Racing's full replacement spring kit for the Polaris RZR 1000 Turbo model with FOX Internal Bypass shocks! The OEM springs on the XPT give a harsh ride over small chatter bumps, begin to sag as you put miles on them , and tend to have a lot of body roll. Our dual-rate spring-kit address's all those issues, and delivers a much plusher, more compliant ride; and flattens out the landings off of jumps, better bottoming resistance, restored ride height.. We have done hours of testing, in a large variety of riding areas and have developed a kit that flat out works! The guesswork has been eliminated, so you can simply install the kit and ride. We use quality Eibach springs in our kit. There are a number of companies that are out there selling kits with lesser quality springs for less. But if the pros choose Eibach when winning is on the line, shouldn't you? While we DO use Eibach springs, this is not Eibach's Kit. We use our own Schmidty Racing Hardware, {which we believe is the best there is in the industry}, and couple it with the best springs available. We use rates that testing has shown to work better than those found in their kits. Our kit is very user friendly, and needs no shock modifications to the shocks to install the kit, and comes with an installation instruction sheet, as well as our recommended settings for pre-load,cross-over gap, & compression settings.(F/R).You will need to remove the shocks to install the kit. Our kit gives a softer/plush ride over small chatter, whoop eating rate throughout the mid stroke, and a heavier rate for the bottom portion of the stroke for superior bottoming resistance over anyone else's kit. Our kit features adjustable crossover collars front &rear, so you can adjust cross-over points if desired. Easy to follow install & set-up instructions (which include pictures), are included; which help make installing the kit a snap. Basic hand tools are all that are needed. ***THIS KIT WILL NOT FIT THE WALKER EVANS EDITION SHOCKS****

Kits includes:

(4) Eibach Tender springs

(4) Eibach Main springs

(4) Spring separator/sliders

(4) Cross-over collar sets

(4) Adapter rings

(2) Cross-over collar spanner wrenches

(1) Installation instruction sheet

(4) adaptor rings

*************** For the kits with the "RACE" Billet pre-load collars: the kits would also include:
(2) 2.5" Pin-style Pre-load collars for the front shocks
(2) 3.0" Pin-style Pre-load collars for the rear shocks (these also eliminate 2 of the adaptor rings)


These Kits are available for either the 2 or 4 seat models in:

- "Medium"/spring rate (all around trail/desert)
- "Heavy"
/spring rate (Designed for carrying lots of additional payload)

-

The spring kits are also available in the drop-down with our "RACE" billet pre-load collars.. These collars eliminate the OEM twin toothed style collars and the needed adapter ring as well. The new collars are designed to work with our Billet pin style spanner wrenches.. The Billet collars make pre-load adjustments a snap!! And your knuckles and custom paint job will thank you as well !!


Share your knowledge of this product. Be the first to write a review »