Home > UTV > Seal Kits >

Walker Evans Shock Mounting Bushing Reducer O-rings Viton Replacement
Walker Evans Shock Mounting Bushing Reducer O-rings Viton Replacement


 
Alternative Views:


Base Price: $10.00



Product Code: UTV-WEMB-VOR

Kit Type
Click to view another Fitting

Select a Kit Type*:


Qty:  
Description
 
These are Viton replacement o-rings that go between the steel shock mounting bushings, and the shock eyelet bearings for WALKER EVANS SHOCKS. Unlike the factory OEM o-rings, these o-rings are made from Viton, which has a higher durometer (tougher) rating as well as higher petroleum resistance than the OEM ones. These do not become soft, swell out, and or tear like the OEM ones do. Viton is also much tougher than silicone ones as well. These are available in a couple different kit options, so be sure to read the description to be sure you get the correct sizes.
-NOTE!!!Shocks with 5/8" shafts take smaller o-rings and are not the same as the ones for 2.5" shocks with either 3/4" or 7/8" shafts. These will NOT fit Fox Podium/Performance Shocks! If you need those, they are in this same section: but are a different item.


Walker Evans Shock Mounting Bushing Reducer Viton O-ring kits available:

- (4) piece (5/8") o-ring kit. for shocks 2.0" shocks with 1/2" or 5/8" shafts (does top and bottom of 1 shock)
- (16) piece (5/8") o-ring kit. for shocks 2.0" shocks with 1/2" or 5/8" shafts (does top and bottom of 4 shocks) (900/1000S)
- (4) piece (3/4"-7/8")o-ring kit. for shocks 2.5" shocks with 3/4 or 7/8" shafts (does top and bottom of 1 shock)
(16) piece[(8)-(5/8")& (8)-(3/4"-7/8")] o-ring kit. (8) small o-rings (does top and bottom of 2 2.0" shocks with 5/8" shafts) &
(8) larger size o-rings (does top and bottom of 2 2.5" shocks with either 3/4" or 7/8" shafts). (XP900/4 ,XP1000, & XP1000/4)


Share your knowledge of this product. Be the first to write a review »