 |
Models / Sizes: Polaris XP1000 Turbo Fox Internal Bypass Shocks (2 or 4 Seat)
This shock rebuild bundle from Schmidty Racing Suspensions includes all the parts needed to rebuild all (4) shocks for Polaris XP1000 Turbo Fox Internal Bypass Shocks.
Polaris XP1000 Turbo Fox Internal Bypass Shock Rebuild Bundle:2 Seat Bundle
- (1) Fox Internal Bypass 2.5" x 5/8" Shaft Seal Kit Pair
- (1) Fox Internal Bypass 3.0" x 7/8" Shaft Seal Kit Pair
- (2) Gallons of Lucas Synthetic Shock Oil in 7.5wt
- (2) Gen 2 2.0" End Caps
- (2) Gen 2 2.5" End Caps
- (2) 2.0" Soft IFP Wear Bands
- (2) 2.5" Soft IFP Wear Bands
- (2) 2.0" Hard Bronze "UTV" Wear Bands
- (2) 2.5" Hard Bronze "UTV" Wear Bands
- (1) Shaft Seal Bullet (Fox 7/8" x .498" shank)
- (1) Shaft Seal Bullet (Fox 5/8" x .498" shank)
4 Seat Bundle
- (1) Fox Internal Bypass 2.5" x 7/8" Shaft Seal Kit Pair
- (1) Fox Internal Bypass 3.0" x 7/8" Shaft Seal Kit Pair
- (2) Gallons of Lucas Synthetic Shock Oil in 7.5wt
- (4) Gen 2 2.5" End Caps
- (4) 2.5" Soft IFP Wear Bands
- (2) 2.0" Hard Bronze "UTV" Wear Bands
- (2) 2.5" Hard Bronze "UTV" Wear Bands
- (1) Shaft Seal Bullet (Fox 7/8" x .498" shank)
Optional:
- (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link) & one (1) Fox IFP Pull-Out Tool
- (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link)
We also have developed our own SRS Internal Bypass Wrenches which can be found in the Shock tool section of our Menu. These wrenches are mandatory to disassemble these shocks to avoid damaging your seal head.
|
|
|