Home > NITROGEN/SHOCK TOOLS >

Schmidty Racing Suspensions Strut-Accumulator Fill/Charge Tool
SRS Accumulator Tool


 
Alternative Views:


Base Price: $430.00


Quantity in Stock:87

Product Code: N-REG-S-SRS-STRUT-8-NL


Select Hose Type & Length:


Qty:  
Description Technical Specs
 
Nitrogen hydraulic accumulator or strut fill/charging kit for charging nitrogen chambers up to 3000 PSI from Schmidty Racing Suspensions.. This kit has a 0-5000 PSI high pressure supply-side gauge (nitrogen tank gauge), and 0-3000 PSI (delivery-side gauge). Both gauges are glycerin filled. The nitrogen tool has a 6000 PSI rated shut-off valve and a 5000 PSI rated bleed-off valve, for releasing excess pressure or releasing line pressure after charging is complete. Both valves have knurled knobs. Kit comes with your choice of either rubber or braided stainless steel hoses in either 8,12, or 15 ft. long.Rubber hoses are rated to 3250 PSI, and Stainless Steel hoses have a protective clear coating on the outside. Hose is rated to 3000 PSI , and has 360* swivel fittings on each end.. These kits are designed to charge hydraulic accumulators, on suspension seats, implement heads, excavation equipment booms,loaders, aircraft struts, or any nitrogen chamber on any other hydraulic system needing high pressure charging, and utilizes a small bore schrader valve.(same thread as a tire stem) . For those that need this tool, but with a LARGE BORE chuck for large bore schrader valves, we sell that chuck separately & it is available on our website here under nitrogen tools in the "accessories" tab on the drop-down. Then on the "No Loss Chucks" item, choose "Large Bore #4 JIC, and it will fit the hose on this kit. The hose is easily removed from the manifold for quick and easy storage and transport.

The no-loss schrader style chuck is 100% stainless steel and is mounted to a swivel fitting that rotates 360 degrees. This allows precise and repeatable setting of nitrogen/air pressure for all nitrogen tanks, accumulators, chambers with a schrader valve stem. The valve opens and closes under constant pressure using the small "T" handle. Tank supply nipple comes standard with CGA-580 brass nipple, but are also available on a custom basis with a CGA-680 nipple.Contact us if need this tool with the CGA680 tip.

Share your knowledge of this product. Be the first to write a review »