Rebuild kit for 2.5" Walker Evans shocks, which will fit all RZR models through the present 2017 model. Choose between 3/4" or 7/8" shaft size. The 3/4" shaft size is found on most Polaris XP900-4 & XP1000 2 seat models, although 7/8" shaft upgrades were also available for those models, so measure your shafts with a caliper before placing your order.
The 7/8" shaft was standard on the 4 seat 1000 rear shocks (non-turbo) models. Again, measure your shafts with a caliper to confirm shaft size before placing your order. We highly recommend rebuilding both sides of a UTV at the same time. This kit will rebuild 1 individual Walker Evans 2.5" piggy-back or remote reservoir shock.*** We highly recommend rebuilding the shocks on both sides of a UTV at the same time, so that they will dampen equally.*** This kit also includes a high temp/pressure schrader-valve core that replaces the standard low pressure cores that came in these shocks from the factory because we have seen the OEM cores fail on a regular basis. Our seal kits also utilize premium Viton o-rings for the shaft & IFP, as well as high-heat/wear urethane wiper and oil seals; which have superior resistance to heat and wear for longer service intervals.
Note: Depending on the year you will be left with leftover o-rings that will not be used.