View Cart 0
items 

  Home > UTV > Spring Kits >

Polaris RZR 900/1000S (2-SEAT) Dual-Rate Spring Kit (Race or Standard) Hardware-2015-17 For FOX Shocks
RZR 900/1000-S Dual Rate Spring Kit Schmidty Racing


 
Alternative Views:


Base Price: $675.00


Availability:: Usually Ships in 24 to 48 Hours
Product Code: UT-SPK-DR-R900-1000-S

Click to view another Spring Rate Type

Spring Rate Type*:
  

Qty:  
Description
 
This Is a dual-rate spring kit with adjustable cross-over collars for the Polaris 2015-16 RZR 900/1000S, to update the OEM 2.0 Fox Podium shocks. This kit is available in either (Standard) or (Race) hardware. Standard hardware retains the OEM pre-load collars and lower spring retainer clips, and uses a our billet adapter rings to fit the new Eibach springs. Our Race Hardware kit replaces the wimpy OEM cast aluminum parts & and the Billet adapter rings from the standard kits and combines both of those functions into single beefy pieces top and bottom, with pre-load adjustments being so much easier with the pin-style spanner pre-load collars.

Standard Hardware kit includes: Install instruction sheet (8) adapter rings, (4) spring dividers, (8) threaded cross over locking collars, and (8) Quality Eibach springs (1) SRS laser etched steel crossover-collar spanner wrench. (Kit does front and rear shocks)
Race Hardware kit includes: Install instruction sheet. (4) Threaded billet preload collars with stainless steel pinch bolt.(4) Billet lower spring retainer clips.(4) spring dividers, (8) threaded cross over locking collars, and (8) Quality Eibach springs, (1) SRS laser etched crossover-collar spanner wrench. (Kit does front and rear shocks). If you want a billet pin-style Pre-load collar to work with our pre-load collars, they are available in the "Misc." dropdown of the UTV section.

We use quality Eibach springs, because they are the best! While Eibach is not the cheapest spring, when you go to upgrade your ride with replacement springs; we want to provide you with a kit that is the best there is! Eibach springs combined with the features of our hardware, create a kit that is second to no-one in the industry!! Most of our competitors, such as PEP, R.T., S.T. use springs of lesser quality. (Do your homework) Either style kit is very user friendly and requires no shock modification to install. Our threaded cross-over collars provide infinite adjustability when the combined springs transfer over to the main spring. Provides a plusher ride with better bottoming resistance than the OEM springs. This kit will only fit the Fox Podium 2.0 aluminum bodied shocks that came standard on the RZR 900/1000S. They will not work with Walker Evans shocks.

Choose the Hardware style, as well as which Spring-rate you want; in the drop-down.
.
-Light/Desert: For plush trail ,high speed desert and, pounding the whoops.
-Medium/Dune: For all around trails and dunes and moderate jumping.
-Heavy: For those that are carrying heavy payload such as spare tire,extra parts, tools, gas,water, gear, etc.. (***note*** heavy will ride a little stiff when you are not carrying a payload.)


Average Rating: 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
Polaris RZR 900/1000S (2-SEAT) Dual-Rate Spring August 5, 2017
Reviewer: Anonymous Person from fort wayne, IN United States  
Shipped fast, all components were perfect fit and finish. Easy install, directions were right on the money. Gained almost three inch's of clearance. Big improvement on ride.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rzr 1000s medium rate race hardware initial review June 3, 2017
Reviewer: James Morrow from Princeton, MN United States  
First of all I would like to give schmidty racing props for quick shipment. I was excited opening the box to reveil lots of quality components from the eibach springs to the aluminum race hardware (spring retainers, preload adjusters and the crossover rings). Installation was a breeze using the included instructions.
 Ride height was restored to factory plus approximately​  +1". My initial test ride was a quick 5 mile high speed run with the true test coming at a choppy section of field edge which required extreme slow rolling with the factory springs. It was not the case this time. I was able to fly through this section which in the past caused my machine to buck and bottom out. Not this time.
 Overall I am very satisfied with my purchase from schmidty racing and am looking forward to my first weekend trail test where I expect to put on 150-250 miles on these springs.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great April 17, 2017
Reviewer: DAvid GRooms from Covington , TN United States  
Alls well with Schmidty, recommend them to anyone!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Polaris rzr 900s dual-rate spring kit March 5, 2017
Reviewer: William Cook from Silverlake , IN United States  
Good service great product.gave my bike a great ride got my ground clearance back

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1000s dual rate springs February 28, 2017
Reviewer: John Durbin from atoka, TN United States  
After only 3 months of owning this machine, my stock springs were completely shot. After installing the dual rate springs my ride has improved 200%!!!

Thanks for the quick service schmidty!

John

Was this review helpful to you?

View All Customer Reviews