Home > NITROGEN/SHOCK TOOLS > Agriculture, Aviation, Excavation >

GEOTHERMAL LOOP FILL TOOL PRESSURE TEST GAUGE PETES PORT NEEDLE PROBE PT HOSE
Geothermal Loop Fill Tool | Schmidty Racing


 
Alternative Views:


Base Price: $38.00



Availability: Usually Ships in 24 Hours
Product Code: GEO-FTP-TG-PPN-PT-H

Click to view another Fitting

Model*:


Needle Diameter*:


Qty:  
Description
 
These are Pete Port Needle & pressure gauge test & fill tools from SRS and are used to check pressure and or refill/charge the fluid on geothermal loops and ground source heat-pump systems. We offer the tools in 3 different configurations, and each configuration is available with either a 1/16" or 1/8" port needle. On either size, the port needles are 1-3/8" long from the face of the brass coupler. Each tool has a removable, threaded, aluminum sleeve to protect & keep the needle from damage when the tool is not being used. All tools come with a Glycerin filled/ 0-100 PSI gauge x 2" face with polished stainless gauge body. Tool options are listed below.

MODEL # PPNTWG:
This is a Pete Port Needle & pressure gauge test tool. For checking pressure on geothermal loops and ground source heat-pump systems. Available with either a 1/16" or 1/8" port needle. Comes with a Glycerin filled/ 0-100 PSI gauge x 2" face with polished stainless gauge body.

MODEL # PPNTWGSOHF: This is a Pete Port Needle & pressure gauge test/filling tool. For checking pressure and or recharging/filling the fluid on geothermal loops and ground source heat-pump systems. Tool has a female swivel hose fitting with rubber gasket for connecting to a garden hose to add pressure to Geo-thermal loops and ground source heat-pump systems with a water source such as a hose bib. Has a polished stainless steel shut-off valve for precise metering. This tool is available with either a 1/16" or 1/8" port needle. Comes with a Glycerin filled/ 0-100 PSI gauge x 2" face with polished stainless gauge body.

MODEL # PPNTWGSOHHF: This is a Pete Port Needle & pressure gauge test/filling tool. For checking pressure and or recharging/filling the fluid on geothermal loops and ground source heat-pump systems. Tool has a female swivel hose fitting with rubber gasket for connecting to a garden hose to add pressure to Geo-thermal loops and ground source heat-pump systems with a water source such as a hose bib, and this variation also has a 12" flexible hose between the pressure gauge and the port needle; making the the tool easier to use & prevents excessive strain on the needle while in the port.. Has a polished stainless steel shut-off valve for precise metering. This tool is available with either a 1/16" or 1/8" port needle. Comes with a Glycerin filled/ 0-100 PSI gauge x 2" face with polished stainless gauge body.

Average Rating: 3.5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
PETE PORT April 16, 2019
Reviewer: George Weis from Hubert, NC United States  
The fitting that the garden hose attaches to needs to be made of better quality.  You need to use a wrench to tighten the hose to the pete port so water does not leak in someone's attic

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Geothermal fill/test gauge September 11, 2018
Reviewer: Charles Nix from Mc Donald, TN United States  
This is a great piece of equipment.  Very well made.  Shipped immediately.  Very reasonably priced.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
PRESSURE TEST GAUGE May 21, 2018
Reviewer: charles a lees from ridge, MD United States  
gauge reads pressure of input hose but does not read loop pressure for some reason. HVAC technician' s almost identical pressure tool reads loop pressure fine. I'm not sure what the problem is.

Was this review helpful to you?