This seal kit is for a Honda Talon with either Live Valve or QS3 2.5" Shocks with 7/8" shafts, Non Internal Bypass. Each kit rebuilds two (2) shocks.
Models:
Rear 2.5" Shocks on Honda Talon X-4 Seat Non-Live Valve
Front or Rear Shocks on Honda Talon X-4 Seat Live Valve
Front or Rear Shocks on Honda Talon X 2-Seat Live Valve
Front or Rear Shocks on Honda Talon R Live Valve or Non-Live Valve
Will not fit 2.0" Shocks
Our seal kits contain high pressure / temperature resistant oil seals and Viton piston & IFP o-rings, giving better performance and increasing time between servicing. Does not include the outer press-fit "wiper seal".
When doing your rebuild, we strongly recommend installing Schrader Valves in the nitrogen endcaps to eliminate the leak prone rubber pellet system used when recharging the shocks. We sell our SRS High Volume Replacement Endcaps that have schrader valves already installed and have the option to utilize the Fox o-ring seal caps. Find these in the High Volume Nitrogen End Caps section under UTVin the Menu. Models with Fox 2.5" Shocks will use our Gen 2 2.5" High Volume Nitrogen Caps.
