 |
Models / Sizes:
Polaris General 900 | Polaris General 1000
This is a true dual-rate spring kit with adjustable crossover collars from Schmidty Racing Suspensions for the Polaris General 900 and 1000S (2015-current). Kits are available for both 2-seat and 4-seat models. These kits feature top of the line Eibach brand springs which replace the low quality / saggy / poor riding OEM springs.
These are not Eibach kits (Stage 2 or 3), but feature our own tested and tuned spring rate combinations using an Eibach coil to provide you the best ride quality possible.
Please include in the order comments your vehicle's setup so we can tailor the spring kit to your needs!
This kit will only fit the Fox Performance Series 2.0" aluminum bodied shocks that came standard on the RZR 900/1000. This kit will not work or fit Walker Evans shocks.
With our dual rate spring kit you can expect to:
- Regain lost ride height.
- Receive a truly plush ride eliminating most of the trail chatter feedback you get from embedded rocks, ruts, tree roots, tire tracks, etc. with the lighter initial spring rate of both springs active.
- Superior bottoming resistance when the spring separator contacts the crossover collars and engages the heavier main spring solely for the remainder of the shock stroke.
These are not Eibach kits, but feature our own tested and tuned spring rate combinations to provide you the best ride quality possible.
Please include in the order comments your vehicle's setup so we can tailer the spring kit to your needs!
This spring kit is available with either:
- Standard Spring Hardware: Retains the OEM pre-load collars and lower spring retainer clips, and have a billet adapter rings to fit the new Eibach springs.
- Race Spring Hardware: Replaces the tooth style OEM preload collars & wimpy cast aluminum spring retainer parts & and the "adapter ring" function from the standard hardware kit; and combines both of those functions into single, beefy pieces top and bottom, with pre-load adjustments being so much easier with the pin-style spanner pre-load collars.
Standard Hardware kits include:
- (1) Installaltion Instruction Sheet
- (8) Adapter Rings
- (4) Delrin Spring Seperator / Slider
- (8) Threaded Locking Crossover Collar
- (8) Quality Eibach Springs (4 tenders & 4 main-springs)
- (1) SRS Laser Etched Crossover Collar Spanner Wrench
*Each kit does all four (4) front and rear shocks
Race Hardware kits include:
- (1)Installation Instruction Sheet
- (4) Threaded Billet Pre-Load Collar with Stainless Steel Pinch Bolt
- (4) Billet Lower Spring Retainer Clip
- (4) Delrin Spring Seperator / Slider
- (8) Threaded Locking Crossover Collar
- (8) Quality Eibach Springs
- (2) SRS Laser Etched Crossover Collar Spanner Wrench
*Each kit does all four (4) front and rear shocks
Weight Rates:
- Medium / Trail: for all around high speed trails, duning, and moderate jumping. (Most Popular)
- Heavy: for those carrying a heavy payload such as spare tires, parts, tools, gas, water tanks, gear, etc. or extreme aggressive driving. (Note: Heavy rate is designed for a heavier payloads, meaning it will ride a little stiff if you are not carrying much weight)
We use quality Eibach springs in our kits, because they are the best! While Eibach is not the cheapest spring, we want to provide you with the best possible kit when you go to upgrade your ride with replacement springs. Eibach springs, combined with the features of our Schmidty Racing Suspensions hardware, create a spring kit that is second-to-none in the industry! Customers who have chosen our proven kits have been thrilled with the ride and performance we offer. Many of our customers originally used spring kits from our competitors before coming to us, but after being disappointed with others' results they tried ours and wholeheartedly affirm the superior quality.
We encourage you to ask our competitors what springs they are using in their kits!
|
|
|
