These are shock shaft seal bullets from Schmidty Racing Suspensions. These slide onto the end of your shaft shank when doing a rebuild, making installing dust caps and seal heads back onto the shafts a quicker and safer process. They will protect your seal lips and o-rings from damage while sliding them back onto the shock shaft when rebuilding your shocks.

See seal bullet size options below. Each order quantity is for one (1) seal bullet.

Options:

Fox Racing: (shaft x shank)
• 1/2" x .377"
• 5/8" x .377"
• 5/8" x .498"
• 7/8" x .498"
• 7/8" x .498" (with secondary notch for Ford Raptor front shocks)

Walker Evans Racing: (shaft x shank)
• 5/8" x 7/16"
• 3/4" x 7/16"
• 7/8" x 7/16"
• 7/8" x 5/8" (Velocity Series Shocks)

Works Performance: (shaft x shank)
• 1/2" x .312"
• 5/8" x .312" (small body)

Metric: (OD shaft x ID shank)
• TSSB 12510: 12.5mm x 10mm
• TSSB 1412: 14mm x 12mm
• TSSB 1612: 16mm x 12mm
• TSSB 1816: 18mm x 16mm
• TSSB 1812: 18mm x 12mm