Home > NITROGEN / SHOCK TOOLS >

Uniweld 800 PSI Nitrogen Regulator Kit | with No-Loss Chuck
Uniweld 800PSI Regulator Kit with No Loss Chuck | Schmidty Racing


 
Alternative Views:


Base Price: $198.00



Product Code: N-REG-UNI800-8R-NL

Click to view another Fitting

Valve Options*:

Click to view another Fitting

Select Hose Type & Length*:


Qty:  
Description
 

Nitrogen charging kit from Schmidty Racing Suspensions with regulator, hose, and no-loss chuck. Kit includes a Uniweld RHP800 (0 - 800 PSI) regulator and comes standard with 8' long rubber hose. Kit comes with a no-loss chuck, where the body is nickel-plated brass and the rest of the body is 100% solid stainless steel. Swivel fittings will rotate 360 degrees to get into any position without kinking the hose. There are different hose length options made of either rubber or stainless steel. There is also an option to add a shut off valve on the end assembly.


Hose Options:

    Rubber: 8', 12', 15' lengths

    Stainless Steel: 6', 8', 12', 15' lengths


Valve Option:

    Shut Off Valve: Adds a shut off valve on the end assembly between the hose and no-loss chuck.


The rubber hoses are rated to 3250 PSI; the stainless steel ones are braided, Teflon-lined, and rated to 3000 PSI. Either type of hose has female swivel fittings on each end. The main manifold has a stainless steel shut off valves for each line. Each hose line has a small bore no-loss chuck on the end that is mounted to the hose via a swivel fitting that rotates 360 degrees to get into any position without twisting or kinking the hose. The no-loss chuck opens and closes schrader valve stems under constant pressure via the small "T" handle, which gives accurate and repeatable pressure setting of nitrogen pressures for all offroad ATV, ATC, UTV, dirt bike, sand rail, buggy shocks, etc.


Specifications:

    RHP800 Regulator:
    • 0 - 4000 PSI tank gauge (rubber cushioned to guard from damage)
    • 0 - 1000 PSI output gauge (rubber cushioned to guard from damage)
    • CGA-580 tank supply nipple (will fit most nitrogen tanks available locally)
    • 800 PSI max output/delivery pressure

    No-Loss Chuck:
    • 360 degree swivel fitting
    • 500 PSI max output / delivery pressure
    • Fits schrader / tire stem thread size .305-32
    • Seals to schrader stems via copper crush washer
    • Nickel-plated brass body; rest is stainless steel
    • Supply line connection is -4 and is 90 degrees to axis of valve

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Product and Service October 15, 2022
Reviewer: Mark Pennington from Richmond, VA United States  
Excellent on both counts.  These guys try hard and succeed at providing great products and great customer service. 👍👍

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 800 psi Nitrogen Regulator Kit February 14, 2021
Reviewer: William James from Orange Park, FL United States  
Well done, just as advertised.  Very good value and arrived promptly ! I like it !!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 February 11, 2021
Reviewer: Nathan Wehling from Westby , WI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Regulator and hose December 3, 2017
Reviewer: J. Ranney from Princeton, MN United States  
Filled order and shipped out very quickly.

Was this review helpful to you?