Walker Evans Shock Mounting Bushing Reducer O-Rings

These are Viton o-rings from Schmidty Racing Suspensions used on Walker Evans shocks to go between the steel shock mounting bushings and the shock eyelet bearings. Compared to the OEM rings and silicon, these o-rings are made from viton which has a higher durometer (tougher) rating as well as higher petroleum resistance. These do not become soft, swell out, and/or tear like the OEM ones do.

Options: Gen 1(pre 2017) & Gen 2(post 2017)

5/8" & 1/2" Kit:
• Gen 1 (4) O-Rings: for 2.0" shocks with 1/2" or 5/8" shafts (kit does 1 shock)
• Gen 2 (4) O-Rings: for 2.0" shocks with 1/2" or 5/8" shafts (kit does 1 shock)
• Gen 1 (16) O-Rings: for 2.0" shocks with 1/2" or 5/8" shafts (kit does 4 shocks)
• Gen 2 (16) O-Rings: for 2.0" shocks with 1/2" or 5/8" shafts (kit does 4 shocks)

3/4" & 7/8" Kit:
• (4) O-Rings: for 2.5" shocks with 3/4" or 7/8" shafts (kit does 1 shock)
• Gen 1 (16) pc O-Ring combo kit : (8) o-rings for the front 2.0's with 5/8" shafts, & (8) o-rings for the rear 2.5" shocks with either 3/4" or 7/8" shafts (kit does 4 shocks)
• Gen 2 (16) pc O-Ring combo kit : (8) o-rings for the front 2.0's with 5/8" shafts, & (8) o-rings for the rear 2.5" shocks with either 3/4" or 7/8" shafts (kit does 4 shocks)

Note: The 5/8" & 1/2" kit is not interchangeable with the 3/4" & 7/8" size kit. Will not fit Fox series shocks.