These are shock rebuild seal kits from Schmidty Racing Suspensions for rebuilding OEM, Walker Evans Velocity 2.5" x 7/8" Shaft shocks on Polaris RZR Turbo S Velocity Models and Aftermarket upgraded Walker Evans Velocity shocks that have a 2.5" body and 7/8" shaft. This kit will rebuild one (1) individual Walker Evans 2.5" piggyback or remote reservoir shock but we highly recommend rebuilding both sides of a UTV at the same time.
- Our Velocity Seal Kit also Features High Temp Viton "shaft" & "IFP piston" ,o-rings. These resist wear and thermal breakdown for superior performance under the most severe riding conditions for longer service intervals!
We recommend on Velocity Models to upgrade to our High Volume Nitrogen End Cap for these Walker Evans shocks to get rid of the needle fill rubber pellet system. Our High Volume End Caps include a recessed viton schrader valve that is sealed with an o-ringed cap. These end caps increase nitrogen capacity and eliminate the leaky OEM cap that is known to leak and allow air to get into the shock. Find these caps in our High Volume Nitrogen End Cap location under the UTV section.